New Network Analyzer
Authorized distributor / reseller for new Agilent Network Analyzers. Most items also available for rental or lease.
A network analyzer is an instrument used to analyze the properties of electrical networks, especially those properties associated with the reflection and transmission of electrical signals known as scattering parameters (S-parameters). Network analyzers are used mostly at high frequencies; operating frequencies can range from 9 kHz to 110 GHz. The two main categories of Network Analyzers are: Scalar Network Analyzer - Measures amplitude properties only; Vector Network Analyzer - Measures both amplitude and phase properties.
|
|
Display
|
New Network Analyzer By Type
|
|
New Network Analyzer Products
|
|
|
41800A |
Active Probe |
5 Hz to 500 MHz |
New |
|
|
4395A |
Network/Spectrum/Impedance Analyzer |
10 Hz to 500 MHz |
New |
|
|
85027E |
Directional Bridge |
10 MHz to 26.5 GHz |
New |
|
|
85031B |
Calibration Kit |
7 mm, DC to 6 GHz |
New |
|
|
85032E |
Economy Calibration Kit |
Type-N, 50 Ohm, DC to 6 GHz |
New |
|
|
85032F |
Mechanical Calibration Kit |
Type-N, 50 Ohms, DC to 9 GHz |
New |
|
|
85033E |
Mechanical Calibration Kit |
3.5 mm, DC to 9 GHz |
New |
|
|
85036B |
Mechanical Calibration Kit |
Type-N, 75 Ohms, DC to 3 GHz |
New |
|
|
85036E |
Economy Calibration Kit |
Type-N, 75 Ohms, DC to 3 GHz |
New |
|
|
85039B |
Calibration Kit |
Type-F, 75 ohm, DC to 3 GHz |
New |
|
|
85046A |
S-Parameter Test Set |
300 kHz to 3 GHz |
New |
|
|
85046B |
S-Parameter Test Set |
300 kHz to 3 GHz |
New |
|
|
85050D |
Economy Mechanical Calibration Kit |
7 mm, DC to 18 GHz |
New |
|
|
85052D |
Economy Mechanical Calibration Kit |
3.5 mm, DC to 26.5 GHz |
New |
|
|
E5061A, E5062A (ENA-L) |
RF Network Analyzers |
300 kHz to 1.5 or 3 GHz |
New |
|
|
E5061B |
LF-RF Network Analyzer |
5 Hz to 30 MHz / 3 GHz |
New |
|
|
E5071C (ENA) |
RF Network Analyzers |
9 or 100 kHz up to 20 GHz |
New |
|
|
E5092A |
Configurable Multiport Test Set |
10-port, 50 MHz to 20 GHz |
New |
|
|
E5100A |
High-Speed Network Analyzer |
10 kHz to 300 MHz |
New |
|
|
N4431B |
ECal Module |
4-Port, 300 kHz to 13.5 GHz |
New |
|
|
N9910X |
Accessories for N9912A and N9923A FieldFox |
|
New |
|
|
N9912A FieldFox |
RF Analyzer |
Handheld Cable/Antenna, Spectrum/Network Analyzer |
New |
|
|
N9923A FieldFox |
Vector Network Analyzer |
4 GHz or 6 GHz Handheld VNA |
New |
|
|
U1818A, U1818B |
Active Differential Probes |
100 kHz to 7 GHz, 12 GHz |
New |
|
Home