Agilent 33220A Function/Arbitrary Waveform Generator

Additional Product Information

Uncompromising performance for functions and waveforms
The Agilent 33220A Function/Arbitrary Waveform Generator uses direct digital synthesis (DDS) techniques to create a stable, accurate output signal for clean, low distortion sine waves. It also gives you square waves with fast rise and fall times up to 20 MHz and linear ramp waves up to 200 kHz.

Pulse Generation
The 33220A can generate variable-edge-time pulses up to 5 MHz. With variable period, pulse width, and amplitude the 33220A is ideally suited to a wide variety of applications requiring a flexible pulse signal.

Custom waveform generation
Use the 33220A to generate complex custom waveforms. With 14-bit resolution, and a sampling rate of 50 MSa/s, the 33220A gives you the flexibility to create the waveforms you need. It also lets you store up to four waveforms in nonvolatile memory.

Agilent IntuiLink Arbitrary Waveform software allows you to easily create, edit, and download complex waveforms using the waveform editor. Or you can capture a waveform using IntuiLink for Oscilloscope and send it to the 33220A for output.

Easy-to-use functionality
Front-panel operation of the 33220A is straightforward and user friendly. You can access all major functions with a single key or two. The knob or numeric keypad can be used to adjust frequency, amplitude, offset, and other parameters. You can even enter voltage values directly in Vpp, Vrms, dBm, or as high and low levels. Timing parameters can be entered in Hertz (Hz) or seconds.

Internal AM, FM, PM, FSK, and PWM modulation make it easy to modulate waveforms without the need for a separate modulation source. Linear and logarithmic sweeps are also built in, with sweep rates selectable from 1 ms to 500 s. Burst mode operation allows for a user-selected number of cycles per period of time. GPIB, LAN, and USB interfaces are all standard, plus you get full programmability using SCPI commands.

External Frequency Reference (Option 001).
The 33220A external frequency reference lets you synchronize to an external 10 MHz clock, to another 33220A, or to an Agilent 33250A. Phase adjustments can be made from the front panel or via a computer interface, allowing precise phase calibration and adjustment.

Agilent 33220A includes power cord, manuals on CD, Intuilink software CD, certificate of calibration, and USB 2.0 cable. 1-Year warranty.

PRICING INFORMATION

Agilent 33220A Function/Arbitrary Waveform Generator 20 MHz. Full documentation included on CD ROM.	TEVET Price $2,252

OPTIONS & ACCESSORIES

10833A GPIB Cable 1 meter (3.3 ft)	TEVET Price $82
33503A/PRO BenchLink Waveform Builder Pro Full-featured waveform creation software for Agilent function/arbitrary waveform generators.	TEVET Price $766
34131A Transit Case For single half-rack unit	TEVET Price $334
34162A Accessory Pouch 9 inches x 8 inches x 1½ inches. For 33220A, 34410A and 34411A	TEVET Price $46
34190A 2U Rackmount Kit (Opt. 1CM) For single half-rack unit.	TEVET Price $63
34191A 2U Dual Rack Mount Flange Kit Replaces 5063-9212	TEVET Price $60
34194A Dual Lock Link Kit Replaces 5061-8769	TEVET Price $115
34398A RS-232 Cable 9 pin (f) to 9 pin (f)	TEVET Price $25
Opt. 001 (33220A-001) External Timebase Option 10 MHz	TEVET Price $457
R1602B Advantage Service Pack Warranty Extension from 3 to 5 years	TEVET Price $150
U3000A Electronic Instrumentation Training Kit	TEVET Price $205