TestEquity 107 Benchtop Temperature Chamber (Environmental Chamber)

Additional Product Information

The TestEquity Model 107 temperature chamber is small enough to fit on your bench with plenty of room to spare. It's smaller and uses 33% less power than the typical "benchtop" chamber. Plus, it fits in a 19" rack. Low audible noise makes the Model 107 ideal for use in confined workspaces. Requiring only 10 Amps at 120 V, you can plug it into any outlet - no need for a dedicated power line. The chamber door is reversible, to open from the left or right side. Two 3 " ports let you attach wires to the test sample through the left and right sides. Cools down to -42°C without LN2 or CO2.

Our new Model 107 offers these improvements over our popular Model 105A Half Cube Temperature Chamber:

Improved Airflow - The conditioning plenum is improved to accommodate a larger fan blade and a more ideal airflow pattern. This results in substantially improved temperature uniformity under real-world loading conditions. Cools Down to -42°C - Improved airflow and a larger evaporator (cooling coil) allows the Model 107 to get 2°C colder. This allows you to compensate for offsets that can occur with an energized load at -40°C. Full Bi-Directional Heat/Cool Control - Provides more responsive temperature control, particularly at moderate temperatures. Details Here Choice of Manual or Programmed On/Off Mode - Allows the chamber to be turned off completely at the end of a stored profile or via computer interface. Deeper Interior - The inside is 3.25" deeper to accommodate larger test samples. Condensate Drain - The chamber floor has a drain to permit removal of condensate from the evaporator that can occur when cycling between low to high temperatures.

Click for larger image

Ideal For Testing... • Semiconductors • Disk Drives • Oscillators • Fiber Optic Components      • Handheld Devices • Small PC Boards • Medical Devices • and much more!

Other Features...

Programmable Temperature Controller
Up to 256 steps can be programmed into as many as 40 nameable profiles. The context sensitive information key and guided steps make profile programming fast and easy. A four-line backlit LCD displays programming, setup, operating and help information. A large LED readout indicates the actual chamber temperature with 0.1° resolution. Internal logic provides refrigeration compressor control for responsive and reliable performance. Includes two alarms and seven event outputs to control remote devices. RS-232C communications is also included. GPIB, Ethernet and analog retransmit are available as options.
More about the Temperature Controller >>
RS-232 Programming Resources >>
GPIB Programming Resources and LabVIEW drivers >>
Ethernet Interface Information >>

High/Low Limit Controller
Provides user-adjustable independent protection against excess temperatures.

	Shown on optional cart.
	Shown in a rack with optional rackmount kit.

Two 3" Access Ports
Two 3" (2.83" inside diameter) access ports are included. Lets you attach wires and sensors to your test sample through both the left and right side of the chamber.

Reversible Chamber Door
You won't need to rearrange you whole bench or workflow to accommodate the Model 107. The chamber door is reversible, allowing the door to open from the left or right side. This is also useful when placing two chambers side-by-side.

Shelf
A stainless steel wire shelf ensures proper airflow around your test sample for uniform temperature distribution.

Compact Size
The TestEquity 107 is designed to use a minimum amount of bench space. Unlike "benchtop" chambers which take up almost your whole bench, the 107 has a 17" x 25.25" footprint. It can even fit on benches that have a hutch. Plus, it can also fit in a 19" rack. Put it on a cart, and you can roll it into even the smallest work cubicle.

Low-Noise Operation
The chamber's refrigeration system generates a low level of audible noise and vibration. You'll be able to work close to the chamber with minimum discomfort and distraction.

120 Volt Input
The Model 107 draws only 10 Amps maximum at 120 Volts. You can plug it into any standard wall receptacle, with plenty of power to spare for other equipment. Compare this to the typical "benchtop" chamber which draws up to 18 Amps and requires a dedicated line

Flexible Installation and Maintenence
The condenser airflow is from the front of the chamber to the back. Unlike chambers with side-to-side airflow, you can place Half Cube chambers along side each other. Front-to-back condenser airflow is also important for proper thermal management when the chamber is installed in a rack. And since the condenser grill is removeable from the front, you can clean the condenser without having to take apart your bench setup or removing the chamber from a rack.

World's Best Environmental Chamber Warranty
Only TestEquity offers a 3-year warranty on parts and 1-year warranty on labor. Our nationwide service network is qualified to do the job right. And we always have replacement parts in stock for immediate shipment. Labor warranty applies to the United States and Canada only. See the complete warranty statement here.

PRICING INFORMATION

TestEquity 107 Benchtop Temperature Chamber (Environmental Chamber) Includes F4 programmable controller with RS-232, high/low limit controller, shelf, 3" port on left and right side, NIST traceable calibration certificate, and manual. NOTE: Freight charges apply to web orders for this product.	TEVET Price $6,769
TestEquity 107-EX Benchtop Temperature Chamber (Environmental Chamber) Export version, 230 Volts, 50 Hz input. Specify country for appropriate power cord plug. (Not CE Marked)	TEVET Price $6,769

OPTIONS & ACCESSORIES

1052 GPIB Interface (External interface converter box) Converts the temperature controller's serial interface to GPIB. More info >>	TEVET Price $895
1054 Cart NOTE: Freight charges apply to web orders for this product. 24" L x 18" W. Height is adjustable from 26" to 42" in 4" increments. Shelves are 20 gauge steel, legs are 14 gauge steel. All metal joints are welded. Two of the 4" ball bearing casters can be locked. Non-slip rubber mat for the top shelf and three Velcro straps for cable management. Includes a 3-outlet 120V power strip with 12' cord, which mounts to the cart. Light-gray powder coat finish.	TEVET Price $325
1055 Ethernet Interface (External interface converter box) Converts the temperature controller's serial interface to Ethernet. More info >>	TEVET Price $895
1071 Extra Shelf for Model 107 Chamber comes standard with one shelf.	TEVET Price $45
1073 Rackmount Adapter	TEVET Price $249
300374 Port Plug, Silicone Foam, 3-inch Open-cell silicone sponge with closed-cell silicone facing. For newer 105A Half Cube and Model 107 Chambers with 3" ports.	TEVET Price $25