 |
| Entire Agilent Catalog |
| PXI Modular Catalog |
Category >> RF Test Accessory >> N4000A, N4001A, N4002A
Brand New Test Equipment
|
|---|
Agilent N4000A, N4001A, N4002A SNS Series Noise Source
|
The SNS Series of noise sources work in conjunction with the NFA Series of noise figure analyzers to simplify measurement set-up and improve accuracy and reliability. When connected to the NFA Series analyzer the noise source automatically downloads the electronically stored calibration data to the analyzer, as well as automatically measuring its own temperature so that compensation can be applied to the calibration data. This covers applications with a range of frequencies, Excess Noise Ratio (ENR) and coaxial connector types. |
Additional Product Information
Specifications (pdf, 548K) >>Nose Figure Selection Guide (pdf, 564K) >>
The SNS series N4000A is a 10 MHz to 18 GHz noise source with nominal ENR 6 dB. The N4000A noise source is designed for accurately measuring devices with low noise figure, or devices whose gain is especially sensitive to small changes in source impedance. DUT's with noise figure up to 20 dB can be accurately and reliably measured with this device. The N4000A noise sources has a choice of connectors, with an APC 3.5(mm) connector as standard.
The SNS series N4001A noise source is ideal for general purpose use with a low reflection coefficent and a nominal ENR of 15 dB from 10 MHz to 18 GHz. DUT's with noise figures up to 30 dB can be measured accurately and reliably with this device. The N4001A has a selection of connectors, with an APC 3.5(m) connector as standard.
The SNS series N4002A noise source was designed to measure DUT noise figures reliable and accurately up to 30 dB from 10 MHz to 26.5 GHz. This noise source comes with an APC 3.5 connector as standard.
Cable not included, order 11730 Series below.
The SNS series N4001A noise source is ideal for general purpose use with a low reflection coefficent and a nominal ENR of 15 dB from 10 MHz to 18 GHz. DUT's with noise figures up to 30 dB can be measured accurately and reliably with this device. The N4001A has a selection of connectors, with an APC 3.5(m) connector as standard.
The SNS series N4002A noise source was designed to measure DUT noise figures reliable and accurately up to 30 dB from 10 MHz to 26.5 GHz. This noise source comes with an APC 3.5 connector as standard.
Cable not included, order 11730 Series below.
|
|
PRICING INFORMATION
|
Agilent N4000A SNS Series Noise Source 10 MHz to 18 GHz (ENR 6 dB). Cable not included, order 11730 Series below. |
TEVET Price $3,289 |
 |
|
|
Agilent N4001A SNS Series Noise Source 10 MHZ to 18 GHz (ENR 15dB). Cable not included, order 11730 Series below. |
TEVET Price $3,125 |
|
|
|
|
Agilent N4002A SNS Series Noise Source 10 MHz to 26.5 GHz (ENR 15dB). Cable not included, order 11730 Series below. |
TEVET Price $3,914 |
|
|
|
OPTIONS & ACCESSORIES
|
11730A Power Sensor and Noise Source Cable 5 ft (1.5m) |
TEVET Price $147 |
|
|
|
|
11730B Power Sensor and Noise Source Cable 10 ft (3m) |
TEVET Price $177 |
|
|
|
|
11730C Power Sensor and Noise Source Cable 20 ft (6.1m) |
TEVET Price $231 |
|
|
|
|
Opt. 001 Type-N (m) connector For N4000A and N4001A only. |
TEVET Price $0 |
|
|
|
|
Opt. 002 SNS Noise Source Cable 5-foot (1.5 m) |
TEVET Price $144 |
|
|
|
|
Opt. 100 APC 3.5(m) connector For N4000A and N4001A only. |
TEVET Price $0 |
|
|
|
Home
Products by Category |
Sell Your Used Test Equipment
Contact Us
|
||||
NEED HELP SELECTING WHAT TEST EQUIPMENT IS RIGHT FOR YOU?
|
|||||