Tevet LLC
Products We Buy Contact About Us What's New File Cabinet
(678) 905-1300
Search
Category
•Meter
•Oscilloscope
•DC Power Supply
•Spectrum Analyzer
•Network Analyzer
•RF Signal Generator
•RF Measurement
•Signal Generator
•Environmental Chambers
•Data Acquisition
•Telecommunication
•RF Test Accessory
•LCR Impedance
•AC Power Source
•Logic Analyzer
•Datacommunication
•Electronic Load
•Frequency Counter
•Accessories
•Audio Analyzer
•Connectivity, Software
•Fiber Optic
•Semiconductor
•TV and Video
Entire Agilent Catalog 
 
Category >> Electronic Load >> N3307A
Brand New Test Equipment

Complete listing for Agilent products

Agilent N3307A Electronic Load Module

Agilent N3307A Electronic Load Module

Price Listing >>

250 Watt Electronic Load Module

Input Ratings

  • Current: 0 - 30 A
  • Voltage: 0 - 150 V
  • Maximum Power: 250 W

Constant Current Mode

  • Low Range/High Range: 3 A/30 A
  • Regulation: 10 mA
  • Low Range Accuracy: 0.1% + 7.5 mA
  • High Range Accuracy: 0.1% + 15 mA

Constant Voltage Mode

  • Low Range/High Range: 15 V/150 V
  • Regulation: 10 mV
  • Low Range Accuracy: 0.1% + 10 mV
  • High Range Accuracy: 0.1% + 20 mV

Constant Resistance Mode

  • Range 1 (I >10% of current rating): 0.067-10 Ω
  • Range 2 (I >1% of current rating): 9-100 Ω
  • Range 3 (I >0.1% of current rating): 90-1000 Ω
  • Range 4 (I >0.01% of current rating): 900-2500 Ω

The Agilent N3307A is a 250 W (0-30A, 0-150V) electronic load module for use in either the N3300A or N3301A electronic load mainframe in system applications. The N3307A load module is fast and accurate, for programming in constant current, constant voltage, or constant resistance modes, or for making voltage, current or power measurements. The N3307A can also digitize waveforms.

Testing multiple output dc power supplies and dc-dc converters can be very time consuming if each output must be tested sequentially. If measurements are being made through a MUX using one DMM, this is what will happen. Using the built-in measurement capabilities of the N3300A electronic loads, all outputs can be measured simultaneously. Alternatively, multiple single output power sources can be tested simultaneously.

A single GPIB address is all you need for complete control and read-back of the N3307A load module within a single N3300A or N3301A mainframe. The N3307A electronic load provides fast operation and the accurate programming and read-back needed for high-volume DC power supply test systems.

PRICING INFORMATION

Agilent N3307A Electronic Load Module
150 V, 30 A, or 250 Watts, for N330X mainframes, 1 slot  		TEVET Price $2,238
spacer